Huawei MU609 - 2 Initialization Application Scenarios; Startup Indication ^SYSSTART; Reference Process; Troubleshooting

HUAWEI MU609 HSPA LGA Module
Application Guide
Initialization Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
2 Initialization Application Scenarios
2.1 Startup Indication ^SYSSTART
2.1.1 Reference Process
Command
Description
A module, without solicitation, presents ^SYSSTART to
its host to indicate that the module is starting.
^SYSSTART
Indicate that a module is starting.
Notes:

^SYSSTART is presented only when a module is starting and will not be presented after a
module has started.

^SYSSTART is presented only after the radio frequency (RF) initialization completes and
will not be presented in offline mode.
2.1.2 Troubleshooting
Scenario
Possible Error
Information
Solution
The module presents
^SYSSTART during startup.
After that, the module
presents ^SYSSTART again.
Indicate that the
module has been
reset.
If ^SYSSTART is presented
repeatedly, send the module
to the specified repair center.