Huawei MU609 - Querying User Number; Reference Process; Troubleshooting; Setting the Tes Character Sets

HUAWEI MU609 HSPA LGA Module
Application Guide
Phonebook Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
8.5 Querying User Number
8.5.1 Reference Process
Command
Description
AT+CNUM
Query the SIM number.
+CNUM: [<alpha1>],<number1>,<type1>
+CNUM: [<alpha2>],<number2>,<type2>
...
OK
8.5.2 Troubleshooting
Scenario
Possible Error
Information
Solution
Error information is
returned in response to
one of the previous
commands.
+CME ERROR: SIM
busy
Phonebook initialization has
not completed. Try again
later.
+CME ERROR: SIM PIN
required
Enter the correct PIN.
+CME ERROR: SIM
PUK required
Enter the correct PUK.
8.6 Setting the TE's Character Sets
8.6.1 Reference Process
Command
Description
AT+CSCS=?
Query the character sets
supported by the UE.
+CSCS: ("IRA","GSM","UCS2")
OK
AT+CSCS?
Query the current character set.