Huawei MU609 - Troubleshooting

HUAWEI MU609 HSPA LGA Module
Application Guide
Phonebook Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69
phone number, and the maximum
length (<tlength>) of a name.
(list of
supported<index>s,<nlength>,<tlength>)
OK
8.3.2 Troubleshooting
Scenario
Possible Error
Information
Solution
Error information is
returned in response
to one of the previous
commands.
+CME ERROR: SIM
busy
Phonebook initialization has
not completed. Try again later.
+CME ERROR: SIM PIN
required
Enter the correct PIN.
+CME ERROR: SIM
PUK required
Enter the correct PUK.
AT^CPBR=<index1>
+CME ERROR: invalid
index
The index is invalid. Check
that index 1 is within the
supported range.
AT^CPBR=<index1>,
<index2>
+CME ERROR: invalid
index
The index is invalid. Check
that index 1 and index 2 are
within the supported range and
that index 1 is not greater than
index 2.
AT^CPBR=<index1>
+CME ERROR: not
found
No entries are found in the
storage locations in index 1.
Check that there have been
entries successfully written into
these locations.
AT^CPBR=<index1>,
<index2>
+CME ERROR: not
found
No entries are found in the
storage locations between
index 1 and index 2. Check
that there have been entries
successfully written into these
locations.