Huawei MU609 - Test Steps

HUAWEI MU609 HSPA LGA Module
Application Guide
Local Upgrade Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
135
Full Upgrade Flow
Figure 18-2 Full upgrade flow
AP Module
Full upgrade
AT^FWLOAD=0
‘>’and‘C’
Through the 1K-Xmodem protocol to send update file
^FWLSTATE report upgrade state
Module Reset
send update file
complete
Module Reset
18.1.2 Test Steps
Tools and Test Steps
This document takes the increment upgrade flow for example, the test is taken on
Windows system with Hyper Terminal tool.
Note:
The Hyper Terminal tool supports 1k-modem protocol transfer files.
Step 1 Open the Hyper Terminal tool and choose the modem port number. (In this document,
the modem port is COM25.)