Huawei MU609 - Conducted RF Measurement; Test Environment; Test Standards; Conducted Rx Sensitivity and Tx Power

HUAWEI MU609 HSPA LGA Module
Hardware Guide
RF Specifications
Issue 04 (2016-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
4.3 Conducted RF Measurement
4.3.1 Test Environment
Test instrument
R&S CMU200
Power supply
KEITHLEY 2306
RF cable for testing
L08-C014-350 of DRAKA COMTEQ or Rosenberger
Cable length: 29 cm

The compensation for different frequency bands relates to the cable and the test
environment.

The instrument compensation needs to be set according to the actual cable conditions.
4.3.2 Test Standards
Huawei modules meet 3GPP test standards. Each module passes strict tests at the
factory and thus the quality of the modules is guaranteed.
4.4 Conducted Rx Sensitivity and Tx Power
4.4.1 Conducted Receive Sensitivity
The conducted receive sensitivity is a key parameter that indicates the receiver
performance of MU609.
Table 4-2 MU609 conducted Rx sensitivity (unit: dBm)
Band
Typical Value
Note
GSM 850
–110 dBm
BER Class II < 2.44%
GSM 900
–110 dBm
BER Class II < 2.44%
DCS 1800
–109.5 dBm
BER Class II < 2.44%
PCS 1900
–109 dBm
BER Class II < 2.44%
WCDMA Band 1 Main RX
–111 dBm
BER < 0.1%
WCDMA Band 2 Main RX
–110 dBm
BER < 0.1%
WCDMA Band 5 Main RX
–111 dBm
BER < 0.1%
WCDMA Band 8 Main RX
–112 dBm
BER < 0.1%