Huawei MU609 - Power Consumption

HUAWEI MU609 HSPA LGA Module
Hardware Guide
Electrical and Reliability Features
Issue 04 (2016-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
Table 5-4 Requirements for input current of the MU609 module
Power
Peak (Maximum)
Normal (Maximum)
VBAT
2500 mA
1100 mA
5.4.2 Power Consumption
The power consumption of MU609 in different scenarios are respectively listed in
Table 5-5 to Table 5-9 .
The power consumption listed in this section are tested when the power supply of
MU609 module is normal voltage (3.8 V) and all of Test values are measured at room
temperature.
Table 5-5 Averaged power off DC power consumption of MU609
Description
Test Value (µA )
Notes/Configuration
Typical
Power off
115
Normal voltage (3.8 V) is on and
POWER_ON_OFF pin is pulled low.
Table 5-6 Averaged standby DC power consumption of MU609
Description
Bands
Test Value (mA)
Notes/Configuration
Typical
Sleep
HSPA+/WCDMA
UMTS bands
2.1
Module is powered up.
DRX cycle=8 (2.56s)
Module is registered on the
network.
USB is in suspend.
GPRS/EDGE
GSM bands
2.5
Module is powered up.
MFRMS=5 (1.175s)
Module is registered on the
network.
USB is in suspend
Radio Off
All bands
1.5
Module is powered up.
RF is disabled.
USB is in suspend