Huawei OceanStor Dorado V3 Series

To Next Page

To Previous Page

Figure 5-24 Positions of the nameplate and Intel label

NOTE

Two different nameplates are included in the product. Select the one that contains identical information

to the nameplate on the removed system subrack.

Step 8 Optional: Pull the information plate of the system subrack. (If you face the front part of the

system subrack, the information plate is located at the lower right of the enclosure, as shown

in Figure 5-25 Gently pull the information plate, but not away from the enclosure.) Attach the

device information label to the information plate. Then, push the information plate back to the

enclosure.

Figure 5-25 Position of the information plate

OceanStor Dorado V3 Series

Parts Replacement

5 Replacing FRUs

Huawei OceanStor Dorado V3 Series - Page 102