Figure 5-111 Removing a data switch
Step 5 Place the data switch to be installed in the cabinet, as shown in Figure 5-112.
1. Slide the data switch into the cabinet along the guide rails.
2. Use M6 screws to secure the data switch in the cabinet.
3. Check that the data switch has been installed horizontally and screwed in tightly.
Figure 5-112 Installing a data switch
Step 6 Connect cables to the data switch and power it on.
Step 7 After the Power indicator is steady on, check whether each component is working properly.
l If yes, the data switch is successfully installed.
OceanStor Dorado V3 Series
Parts Replacement
5 Replacing FRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 191
To Next Page
Loading...
