Huawei OceanStor S2600 - Page 33

Module Indicator Color Status Description
Red Turns
on, and
then
turns off
three
seconds
later.
The controller enclosure is being
started.
- Off The controller enclosure is working
normally.
Power
indicator of the
controller
enclosure
Green On The controller enclosure is powered
on.
- Off The controller enclosure is not
powered on.
Disk
module
Running
indicator of the
SAS disk
Green Blinking The SAS disk is transmitting data.
Green On The SAS disk is powered on normally.
- Off The SAS disk is powered on
abnormally.
Alarm
indicator of the
SAS disk
Red On An alarm is generated on the SAS
disk.
Red Blinking The SAS disk is located.
- Off No alarm is generated on the SAS
disk.
Running
indicator of the
SATA disk
Green Blinking The SATA disk is transmitting data.
Green On The SATA disk is powered on
normally.
- Off The SATA disk is powered on
abnormally.
Alarm/location
indicator of the
SATA disk
Red On An alarm is generated on the SATA
disk.
Red Blinking The SATA is located.
- Off No alarm is generated on the SATA
disk.
The indicators on the rear panel of the S2600 controller enclosure are shown in Table 3-4.
OceanStor S2600 Storage System
Routine Maintenance 3 On-Site Routine Maintenance Guide
Issue 01 (2009-09-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-5