Huawei OceanStor S2600 - Failing to Log In to ISM

Parameter Description
Advice The parameter indicates a suggestion for handling an alarm.
----End
Exception Handling
None.
4.10 Browsing History Alarms
This section describes how to browse history alarms through the ISM.
Reference Standard
None.
Procedure
Step 1 Log in to the ISM.
NOTE
When you view history alarms, click different nodes in the navigation tree to view different history alarms.
For example, if you click All Devices, you can view the history alarms of all the storage arrays. You can
also click an storage array or its component, for example, the Controller Enclosure xx or the Disk
Enclosure xx, to view the history alarms of the selected storage array.
Step 2 In the navigation tree, click the storage array or the storage array component whose alarms to
be viewed.
Step 3 You can go to the Alarm Management dialog box by either of the following approaches:
l On the menu bar, choose Alarm > Alarm Management.
l On the toolbar, click the
icon.
Step 4 Click the history Alarm tab, and browse history alarms on the alarm list. The parameters of
history alarms are described, as shown in Table 4-10.
OceanStor S2600 Storage System
Routine Maintenance 4 Routine Maintenance Guide of the ISM
Issue 01 (2009-09-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-15