Huawei P smart S User Manual

Face Recognition
Face Recognition allows you to unlock your device or access locked apps with your facial
data.
Set up Face Recognition
1 Go to Settings > Biometrics & password > Face Recognition, and enter your lock screen
password.
If you haven't set the lock screen password, follow the onscreen instructions to do so.
2 Some devices support screen wakeup when you raise the device. If you can
nd the
Enable raise to wake setting option on your device, you can enable it as needed.
The settings items vary by device. If your device does not provide a specic item, it
indicates that the corresponding feature is not supported.
3 Touch Get started, position your face in front of your device, and follow the onscreen
instructions to enrol your facial data.
Set an Alternate Look
You can add an alternate look for more accurate and convenient face recognition.
On the Face Recognition screen, touch Set an alternate look, and follow the onscreen
instructions to enrol the alternate facial data.
Set Face Unlock
On the Face Recognition screen, touch Unlock device and select an unlock method.
Some devices support Require eye contact. When this is enabled, you will need to keep your
eyes open while unlocking the device with your face. If you can't nd this switch on your
device, it means that this feature is not supported.
If you have enabled PrivateSpace, you'll only be able to use Face unlock in MainSpace. If
you have added multiple users, you'll only be able to use Face unlock with the Owner
account.
Access App Lock with Face Recognition
On the Face Recognition screen, enable Access App Lock, and follow the onscreen
instructions to add your facial data to App lock.
You can then touch a locked app on your home screen and use face recognition to access the
app.
Link Your Face with Password Vault
Access the Face Recognition screen and enable Autoll usernames and passwords.
When logging in to an app, you can use Face Recognition to automatically ll in the account
name and password saved in Password Vault.
Settings
53

Huawei P smart S Specifications

General

Color name	Breathing Crystal
Form factor	Bar
Product color	White
Screen shape	Flat
Pixel density	418 ppi
Display diagonal	6.3 \
Touchscreen type	Capacitive
Display resolution	2400 x 1080 pixels
Native aspect ratio	20:9
Rounded display corners	Yes
Processor cores	4
Processor model	Kirin 710F
Processor family	Hi-Silicon
Processor frequency	2.2 GHz
Coprocessor frequency	1.7 GHz
Processor architecture	ARM Cortex-A73
Coprocessor architecture	ARM Cortex-A53
RAM capacity	4 GB
Compatible memory cards	Nano Memory (NM)
Maximum memory card size	256 GB
Internal storage capacity	128 GB
Flash type	LED
Rear camera type	Triple camera
Front camera type	Single camera
Maximum frame rate	30 fps
Video recording modes	1080p, 2160p
Rear camera resolution	3840 x 2160 pixels
Rear camera aperture number	1.8
Resolution at capture speed	1920x1080@30fps, 3840x2160@30fps
Front camera aperture number	2
Rear camera resolution (numeric)	48 MP
Front camera resolution (numeric)	16 MP
Second rear camera aperture number	2.4
Third rear camera resolution (numeric)	2 MP
Second rear camera resolution (numeric)	8 MP
4G standard	LTE
3G standards	WCDMA
SIM card type	NanoSIM
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
SIM card capability	-
Mobile network generation	4G
Subscription type	No subscription
USB version	2.0
USB connector type	USB Type-C
Headphone connectivity	3.5 mm
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Graphics card	Mali G51-MP4
Platform	Android
Operating system installed	Android 10.0
Talk time (3G)	32 h
Battery capacity	4000 mAh
Standby time (3G)	800 h
Standby time (4G)	648 h
Audio formats supported	3GPP, AAC, AMR, FLAC, MIDI, MP3, OGG, WAV
Video formats supported	3GP, MP4

Weight and Dimensions

Depth	7.75 mm
Width	73.2 mm
Height	157.4 mm
Weight	163 g