EasyManua.ls Logo

Huawei P40 Pro+ - Mobile Network

Huawei P40 Pro+
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
phone will also evaluate the quality of the current Wi-Fi network and switch to mobile data
if the
Wi-Fi signal is poor.
1 Go to Settings > Wi-Fi.
2 Touch More settings and enable or disable Wi-Fi+.
Mobile Network
Enable 5G
5G refers to the fth generation of mobile communications technology. Compared with a 4G
net
work, a 5G network has a higher data transmission rate and a shorter delay.
When two SIM cards are inserted, only the default mobile data SIM will support 5G, while
the other will only support 4G/3G/2G.
5G ser
vices are only available in some countries and regions.
Not all devices support 5G.
1 The 5G ser
vice depends on the support of your carrier's network and its deployment of
relevant services. Please contact your carrier to activate the 5G service.
2 If your phone has two SIM cards inserted, go to Settings > Mobile network > SIM
management, and set SIM 1 or SIM 2 as the default mobile data SIM.
3 Go to Settings > Mobile network > Mobile data, and enable 5G for the default mobile
data SIM.
The 5G service may be unavailable in certain areas due to frequency interference with the
carrier network.
eSIM
Embedded-SIM (eSIM) is a virtual SIM card that can be used instead of a physical SIM card.
An eSIM card works in the same way as a physical SIM card, but occupies no space and can
be linked with multiple card numbers. You are free to switch between carriers to nd the best
deal f
or you.
This f
eature may vary depending on your carrier.
This feature is only available in some countries and regions.
This feature may vary by device.
Apply for an eSIM Card
Contact y
our carrier to apply for an eSIM card.
You need to provide the embedded-SIM ID (EID) information when applying for an eSIM
card. This information is related to whether your phone has a built-in eSIM smart chipset. To
view this information, go to Settings > About phone > Show EID. If the EID information is
not displayed, it indicates that this feature is not supported on your phone.
Settings
131

Table of Contents

Other manuals for Huawei P40 Pro+

Related product manuals