Huawei P40 Pro+ - Page 47

Connect Your Phone to the PC by Scanning the QR Code
1 O
pen PC Manager (version 10.0 or later) on your PC, go to Phone > Connect, and select
the QR code option in the upper left corner.
To check the version of PC Manager, go to > About. T
o update PC Manager, go to
> Check f
or updates.
2 Ensur
e that your phone is connected to the Internet and use it to scan the QR code
displayed on the PC.
3 Follow the onscreen instructions to connect your phone and PC.
Connect Your Phone to the PC with a USB Cable
1 Use a USB cable to connect your phone and PC.
2 On the PC, open PC Manager (version 10.1 or later).
To check the version of PC Manager, go to > About. T
o update PC Manager, go to
> Check f
or updates.
3 Conrm to connect to the PC on your phone.
If you cancel the connection on your phone, you can establish a wired connection
again. T
o do so, open PC Manager and go to Phone > Connect > Other ways to
connect > USB.
Disconnect Your Phone from Your PC
After you have nished using your phone and PC, you can disconnect them using the
following methods:
• On your PC, open PC Manager, and click Phone > Disconnect.
• On your phone, swipe down from the status bar to open the notication panel, and touch
DISCONNE
CT.
• If your phone and PC are connected via a USB cable, remove the cable to disconnect them.
Drag to Transfer Files Between Your Phone and PC
After connecting your phone and PC, you can transfer les between them to make work
easier
.
Drag and drop les
After Multi-screen Collaboration is established between your phone and PC, you can drag
and drop les such as pictures and videos between them to make your work easier.
Transfer les from your phone to the PC.
Smart Features
43