To adjust focus and metering separately, touch and hold the viewnder and drag the
r
espective frame or ring to the desired location.
• Adjust brightness: Touch the viewnder. When the
symbol appears next to the
f
ocus frame, drag it up or down.
• Zoom in or out: On the viewnder, pinch in or out, or drag the zoom slider.
• Select a camera mode: Swipe up, down, left, or right across the camera mode options.
• Turn the ash on or o: Touch
and select (Auto), (On), (O), or
(Always on).
If y
ou select
(Auto) and the camera detects that you are in a dimly lit
envir
onment, a ash icon will appear in the viewnder and the ash will be
automatically turned on when you take a photo.
These features may not be available in some camera modes.
3 T
ouch the shutter button to take a photo.
Use the Floating Shutter to Take Photos
You can enable the oating shutter to display in the camera viewnder, and drag it anywhere
y
ou like to take photos quickly.
1 Go to Camera > , and enable Float
ing shutter.
2 The oating shutter will then be displayed in the viewnder. You can drag it anywhere you
like.
3 Touch the oating shutter to take a photo.
T
ake Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1 Open Camera, select Photo mode, and make sure the rear camera is in use.
2 Touch and hold
or press and hold one of the Volume buttons to take a burst photo.
When shoot
ing, you'll see a counter, which indicates how many photos you've taken so
far.
3 Lift your nger to stop shooting.
Select the Burst Photos Y
ou Want to Keep
1 Open Gallery. Touch a burst photo (which is tagged with ), then touch .
2 S
wipe through the burst photos, select the ones you want to keep, then touch
and
f
ollow the onscreen instructions.
Camera and Gallery
57
To Next Page
Loading...
