1. (Optional) Remove the rodent-proof meshes or cut crosses in wire bushings in the top cabling
scenario.
Removing a rodent-proof mesh
Cutting a cross in a wire bushing
Removing a rodent-proof mesh
2. (Optional) Remove the rodent-proof meshes or cut crosses in wire bushings in the bottom
cabling scenario.
Cutting open a cable hole at the bottom
The figures are for reference only. The onsite objects prevail.
Cable Hole Description
After cutting open the cable holes in the bottom plate,
install grommet strips in the prepared cable holes.
9
3. (Optional) Trim the removed rodent-proof meshes to an appropriate size, and reinstall them in
the PDC.
To Next Page
Loading...
