Huawei quidway s7700 - Page 26

The step value between ACL rule IDs is set.
4. Run:
rule [ rule-id ] { deny | permit } [ { ether-ii | 802.3 | snap } | l2-
protocol type-value [ type-mask ] | destination-mac dest-mac-address
[ dest-mac-mask ] | source-mac source-mac-address [ source-mac-mask ] |
vlan-id vlan-id [ vlan-id-mask ] | 8021p 802.1p-value | cvlan-id cvlan-id
[ cvlan-id-mask ] | cvlan-8021p 802.1p-value | double-tag ]
*
[ time-range
time-range-name ]
A Layer 2 ACL rule is created.
5. Run:
quit
Return to the system view.
6. Run:
traffic classifier classifier-name [ operator { and | or } ] [ precedence
precedence-value ]
A traffic classifier is created and the traffic classifier view is displayed.
The and parameter indicates that the relationship between rules in a traffic classifier
is AND. That is, packets match a traffic classifier only when the packets match all
non-ACL rules and an ACL rule in the traffic classifier. The or parameter indicates
that the relationship between rules in a traffic classifier is OR. That is, packets match
a traffic classifier when the packets match a rule in the traffic classifier.
By default, the relationship between rules in a traffic classifier is OR.
7. Run:
if-match acl l2-acl-number
A traffic classifier based on a Layer 2 ACL is created.
l Creating a traffic classifier based on a user-defined ACL
1. Run:
system-view
The system view is displayed.
2. Run:
acl [ number ] user-defined-acl-number [ match-order { auto | config } ]
A user-defined ACL is created and the user-defined ACL view is displayed.
NOTE
user-defined-acl-number specified the number of a user-defined ACL. The value is an integer
that ranges from 5000 to 5999.
3. (Optional) Run:
step step-value
The step value between ACL rule IDs is set.
4. Run the following command:
rule [ rule-id ] { deny | permit } [ [ l2-head | ipv4-head | ipv6-head |
l4-head ] { rule-string rule-mask offset } ] [ time-range time-range-
name ]
The user-defined ACL is configured.
5. Run:
quit
Quidway S7700 Smart Routing Switch
Configuration Guide - QoS 1 Class-based QoS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19