[Switch] interface gigabitethernet1/0/1
[Switch-GigabitEthernet1/0/1] port link-type trunk
[Switch-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[Switch-GigabitEthernet1/0/1] quit
[Switch] interface gigabitethernet1/0/2
[Switch-GigabitEthernet1/0/2] port link-type trunk
[Switch-GigabitEthernet1/0/2] port trunk allow-pass vlan 200
[Switch-GigabitEthernet1/0/2] quit
[Switch] interface gigabitethernet2/0/1
[Switch-GigabitEthernet2/0/1] port link-type trunk
[Switch-GigabitEthernet2/0/1] port trunk allow-pass vlan 100 200 300
[Switch-GigabitEthernet2/0/1] quit
# Create VLANIF 300 and assign the network segment address 192.168.1.1/24 to VLANIF 300.
[Switch] interface vlanif 300
[Switch-Vlanif300] ip address 192.168.1.1 24
NOTE
Assign IP address 192.168.1.2/24 to the interface connecting the router and the Switch.
Step 2 Configure CAR profiles.
# Create CAR profiles qoscar1 and qoscar2 on the Switch to limit the traffic of enterprise and
individual users.
[Switch] qos car qoscar1 cir 8000 pir 10000
[Switch] qos car qoscar2 cir 5000 pir 8000
Step 3 Apply CAR profiles.
# Apply CAR profiles qoscar1 and qoscar2 in the inbound direction of GE 1/0/1 and GE 1/0/2
on the Switch to limit incoming traffic of enterprise and individual users.
[Switch] interface gigabitEthernet1/0/1
[Switch-GigabitEthernet1/0/1] qos car inbound qoscar1
[Switch-GigabitEthernet1/0/1] quit
[Switch] interface gigabitethernet1/0/2
[Switch-GigabitEthernet1/0/2] qos car inbound qoscar2
[Switch-GigabitEthernet1/0/2] quit
[Switch] quit
Step 4 Verify the configuration.
# Check the configuration of CAR profiles.
<Switch> display qos car all
----------------------------------------------------------------
CAR Name : qoscar1
CAR Index : 4
car cir 8000 (Kbps) pir 10000 (Kbps) cbs 1000000 (byte) pbs 1250000 (byte)
Applied number on behavior : 0
Applied number on Interface inbound : 1
GigabitEthernet1/0/1
Applied number on Trunk inbound : 0
Applied number on Vlan Unknown Unicast : 0
Applied number on Vlan Multicast : 0
Applied number on Vlan Broadcast : 0
Applied number on ONU inbound : 0
Applied number on ONU outbound : 0
----------------------------------------------------------------
CAR Name : qoscar2
CAR Index : 5
car cir 5000 (Kbps) pir 8000 (Kbps) cbs 625000 (byte) pbs 1000000 (byte)
Applied number on behavior : 0
Applied number on Interface inbound : 1
GigabitEthernet1/0/2
Quidway S7700 Smart Routing Switch
Configuration Guide - QoS 2 Traffic Policing and Traffic Shaping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66
To Next Page
Loading...
