Huawei quidway s7700 - Page 78

Remark DSCP ef
statistic: enable
Classifier: c2
Operator: OR
Behavior: b2
Marking:
Remark DSCP af33
statistic: enable
Committed Access Rate:
CIR 4000 (Kbps), PIR 10000 (Kbps), CBS 500000 (byte), PBS 1250000 (byte)
Color Mode: color Blind
Conform Action: pass
Yellow Action: pass
Exceed Action: discard
Classifier: c3
Operator: OR
Behavior: b3
Committed Access Rate:
CIR 4000 (Kbps), PIR 10000 (Kbps), CBS 500000 (byte), PBS 1250000 (byte)
Color Mode: color Blind
Conform Action: pass
Yellow Action: pass
Exceed Action: discard
Marking:
Remark DSCP af13
statistic: enable
# Check the configuration of the traffic policy applied on an interface. Here, the configuration
of the traffic policy applied to GE1/0/1 is displayed.
[Switch] display traffic policy statistics interface gigabitethernet 1/0/1 inbound
Interface: GigabitEthernet1/0/1
Traffic policy inbound: p1
Rule number: 3
Current status: OK!
---------------------------------------------------------------------
Board : 0
Item Packets Bytes
---------------------------------------------------------------------
Matched 10 10000
+--Passed 8 8000
+--Dropped 2 2000
+--Filter 2 2000
+--URPF 0 0
+--CAR 2 2000
----End
Configuration Files
l Configuration file of the Switch
#
sysname Switch
#
vlan batch 100 110 120
#
traffic classifier c2 operator or
if-match vlan-id 110
traffic classifier c3 operator or
if-match vlan-id 100
traffic classifier c1 operator or
if-match vlan-id 120
#
traffic behavior b2
car cir 4000 pir 10000 cbs 500000 pbs 1250000 mode color-blind green pass
yellow pass red discard
Quidway S7700 Smart Routing Switch
Configuration Guide - QoS 2 Traffic Policing and Traffic Shaping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71