Huawei RRU3269 - Optional) Installing the Plastic Shells of the RRU

RRU3269
Installation Guide
6 (Optional) Installing the Plastic Shells of the RRU
Issue Draft B (2018-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
6 (Optional) Installing the Plastic Shells of
the RRU
This section describes the procedure for installing the plastic shells of the RRU.
Context
An RRU is equipped with a plastic shell only when necessary.
Procedure
Step 1 Use an M6 Phillips screwdriver to loosen the two screws on the metal sheet of the RRU and
remove the metal sheet, as shown in Figure 6-1.
Figure 6-1 Removing the metal sheet
(1) Screw
(2) Metal sheet