Huawei RRU3269 - 7 Hoisting an RRU and Related Cables Onto a Tower; Hoisting an RRU Onto a Tower

RRU3269
Installation Guide
7 Hoisting an RRU and Related Cables onto a Tower
Issue Draft B (2018-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
7 Hoisting an RRU and Related Cables onto
a Tower
About This Chapter
This section describes the procedure for hoisting an RRU and related cables onto a tower and
the precautions that must be taken.
7.1 Hoisting an RRU onto a Tower
This section describes the procedures and precautions for hoisting an RRU and its mounting
kits onto a tower. In tower-mounted scenarios, the RRU can be installed on a pole, U-steel, or
angle steel.
7.2 Hoisting Optical Fibers onto a Tower
This section describes the procedure for hoisting optical fibers onto a tower and the
precautions that must be taken.
7.3 Hoisting Power Cables onto a Tower
This section describes the procedure for hoisting power cables onto a tower and the
precautions that must be taken.
7.1 Hoisting an RRU onto a Tower
This section describes the procedures and precautions for hoisting an RRU and its mounting
kits onto a tower. In tower-mounted scenarios, the RRU can be installed on a pole, U-steel, or
angle steel.
Prerequisites
When the RRU is powered by an AC/DC power module, you need to install the AC/DC
power module onto the RRU before hoisting them onto a tower. For detailed operations, see
AC/DC Power Module User Guide or OPM15M User Guide, OPM15M(Ver.B) User Guide,
OPM30M User Guide, OPM50M User Guide, or OPM50M(Ver.B) User Guide.