RRU3269
Installation Guide
Issue Draft B (2018-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RRU
About This Chapter
This chapter describes the procedure for installing the RRU. The procedure for installing the
RRU varies depending on installation options.
8.1 Mounting Kits for an RRU
This section describes the bracket assembly and the attachment plate for an RRU.
8.2 Installing the RRU on a Pole
One or more RRUs can be installed on a pole.
8.3 Installing an RRU on U-steel
This section describes the procedure and precautions for installing an RRU on U-steel. An
RRU can be installed on U-steel secured on the ground or a tower. Each piece of U-steel
allows only one RRU to be installed in standard or reverse mode.
8.4 Installing an RRU on Angle Steel
This section describes the process and precautions for installing an RRU on angle steel. An
RRU can be installed on angle steel secured on the ground or a tower. Each piece of angle
steel allows only one RRU to be installed in standard or reverse mode.
8.5 Installing an RRU on a Wall
This section describes the procedure and precautions for installing an RRU on a wall.
8.6 Installing an RRU on an IFS06
This section describes the process and precautions for installing an RRU on an IFS06.
8.1 Mounting Kits for an RRU
This section describes the bracket assembly and the attachment plate for an RRU.
Figure 8-1 shows the front and side of an RRU.
To Next Page
Loading...
