Huawei RRU3908 V2 - Ifs06; Table 4-2 Ports on the AC Power Surge Protection Box

To Next Page

To Previous Page

Table 4-2 Ports on the AC power surge protection box

Item Label Description

(a) Bottom panel IN Port for AC power input

OUT Port for output of the protection power cable

(b) Side panel - Port for connection to the external ground cable

- Port for the ground cable of the RRU

panel

Nout Wiring post for the power cable

Nin

Lout

Lin

4.2 IFS06

The Indoor Floor installation Support (IFS06) is used for installing RRUs indoors.

Exterior

Figure 4-2 shows the IFS06.

RRU3908 V2

Hardware Description 4 Auxiliary Devices of the RRU

Issue 02 (2010-10-25) Huawei Proprietary and Confidential

4-3

Main Page

About this Document5
Table of Contents9
Changes in the RRU3908 V2 Hardware Description15
Introduction to the RRU390817
Physical Exterior18
Figure 2-1 DC RRU18
Panels of the RRU19
Figure 2-2 AC RRU19
Figure 2-3 Panels of the DC RRU20
Figure 2-4 Panels of the AC RRU21
Table 2-1 Ports, Buttons, and Leds on the Panels of the RRU Module21
Leds on the RRU22
Table 2-2 Leds on the RRU22
RRU Cables25
RRU3908 Cable List27
Table 3-1 RRU3908 Cables27
RRU PGND Cable28
Power Cable for the DC RRU29
Figure 3-1 PGND Cable29
Figure 3-2 2-Hole OT Terminal29
Figure 3-3 Power Cable for the DC RRU29
AC Power Cable for the AC RRU30
Figure 3-4 Power Cable between the AC RRU and the External Power Equipment30
Table 3-2 Pin Assignment for the Wires of the Power Cable (North American Standard)30
Table 3-3 Pin Assignment for the Wires of the Power Cable (European Standard)30
Figure 3-5 Power Cable between the AC RRU and the AC Surge Protection Box31
Figure 3-6 Power Cable between the AC Surge Protection Box and the External Power Equipment31
Table 3-4 Pin Assignment for the Wires of the AC Power Cable between the AC RRU and the External Power31
Monitoring Signal Cable for the AC RRU32
Table 3-5 Pin Assignment for the Wires of the AC Power Cable between the AC RRU and the AC Surge Protection32
Table 3-6 Pin Assignment for the Wires of the Power Cable between the AC Surge Protection Box and the Power32
CPRI Optical Cable33
Figure 3-7 Monitoring Signal Cable of the AC RRU33
Table 3-7 Pin Assignment for the Wires of the Monitoring Power Cable (North American Standard)33
Table 3-8 Pin Assignment for the Wires of the Monitoring Power Cable (European Standard)33
Figure 3-8 Multi-Mode Optical Cable34
Figure 3-9 Single-Mode Optical Cable34
Alarm Cable for the DC RRU35
Table 3-9 Labels and Recommended Connections for the Branch Cables of the Multi-Mode Optical Cable between35
Table 3-10 Labels and Recommended Connections for the Branch Cables of the Multi-Mode Optical Cable between35
Table 3-11 Labels and Recommended Connections for the Branch Cables of the Single-Mode Optical Cable and35
Figure 3-10 Alarm Cable36
Table 3-12 Pin Assignment for the Wires of the RRU Alarm Cable36
RF Jumper for the RRU37
Interconnect Jumper for the RRU37
Figure 3-11 RF Jumper37
Figure 3-12 Interconnect Jumper37
AISG Multi-Wire Cable for the RRU38
Figure 3-13 AISG Multi-Wire Cable38
Table 3-13 Pin Assignment for the Wires of the AISG Multi-Wire Cable38
AISG Extension Cable for the RRU39
Figure 3-14 AISG Extension Cable39
Table 3-14 Pin Assignment for the Wires of the AISG Extension Cable40
Auxiliary Devices of the RRU41
AC Power Surge Protection Box42
Figure 4-1 AC Power Surge Protection Box42
Table 4-1 Specifications of the AC Power Surge Protection Box42
Ifs0643
Table 4-2 Ports on the AC Power Surge Protection Box43
Figure 4-2 IFS0644
Ocb45
Figure 4-3 Structure of the IFS0645
Table 4-3 Specifications of the IFS0645
Figure 4-4 the Application Scenario of the OCB46

Huawei RRU3908 V2 - Ifs06; Table 4-2 Ports on the AC Power Surge Protection Box

Table of Contents

Other manuals for Huawei RRU3908 V2

Related product manuals