Huawei RTN510 - PowerCube 500 Aggregation Node Configuration Example; RTN510 AP Aggregation Node Configuration Example

HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 4
Configuration Example
Configuration Example of the PowerCube 500 on the Aggregation Node
1. Configure the NE IP address and gateway IP address.
2. Configure the DCN protocol type.
3. Disable the DHCP client function.
Enable the DHCP server function, and configure the IP address
pool and DHCP gateway IP address as planned.
Configuration Example of the RTN510 AP on the Aggregation Node