Huawei S Series User Manual

After configuring the interfaces and VLANs, run the following commands to view the
configuration results. For details about the command output, see the corresponding
Command Reference based on the version of the device.
Run the display eth-trunk command to view the configurations of Eth-Trunk on
ACC1.
4
12
[ACC1] display eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1 WorkingMode: LACP
Preempt Delay: Disabled Hash arithmetic: According to SA-XOR-DA
System Priority: 32768 System ID: 0200-0000-6704
Least Active-linknumber: 1 Max Active-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 1
--------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/1 Selected 100M 32768 2 289 10111100 1
GigabitEthernet0/0/2 Selected 100M 32768 3 289 10100010 1
Partner:
--------------------------------------------------------------------------------
ActorPortName SysPri SystemID PortPri PortNo PortKey PortState
GigabitEthernet0/0/1 32768 0012-3321-2212 32768 2 289 10111100
GigabitEthernet0/0/2 32768 0012-3321-2212 32768 3 289 10111100
[ACC1] display vlan
The total number of VLANs is : 1
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
10 common UT:Eth0/0/2(U) Eth0/0/3(U) Eth0/0/4(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
10 enable default enable disable VLAN 0010
ACC1's GE0/0/1 and GE0/0/2 interfaces
have been added to Eth-Trunk 1.
On ACC1, interfaces Eth0/0/2
to Eth0/0/4 have been added
to VLAN 10 in Untagged
mode, and Eth-Trunk 1 has
been added to VLAN 10 in
Tagged mode.
Run the display vlan command to view VLAN
configurations on ACC1.

Huawei S Series Specifications

General

Brand	Huawei
Model	S Series
Category	Switch
Language	English