Huawei S6700 Series

No. Indicator Color Description
Red Blinking: An error has occurred when the
system is executing the configuration file
or reading data from the USB flash drive.
Table 2-15 Description of 10GE service port indicators in different modes (two indicators for
each port)
Mode Color Description
Status - Off: The port is not connected or has been
shut down.
Green Steady on: A link has been established on
the port.
Yellow Blinking: The port is sending or receiving
data.
Speed Green and
yellow
l Off: The port is not connected or has
been shut down.
l Both steady on:
1000M/10GE port: The port is
operating at 1000 Mbit/s.
l Green indicator steady on and yellow
indicator blinking:
1000M/10GE port: The port is
operating at 10 Gbit/s.
S6700 Series Ethernet Switches
Hardware Description 2 Chassis
Issue 12 (2015-07-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34