● SUN2000 APP: Search for "SUN2000" in Huawei AppGallery, download the
latest installation package, and install the SUN2000 app by following the
instructions.
● In areas (such as the UK) where the FusionSolar app is not available, or when a third-
party management system is used, only the SUN2000 app can be used for
commissioning. This document uses the FusionSolar app as an example to describe the
commissioning method. For the SUN2000 app, perform operations as required.
● The SUN2000 app version should be 3.2.00.005 (Android) or later.
Procedure
Step 1 Run the FusionSolar app and go to the Device commissioning screen. (Perform
this step only for the FusionSolar app.)
Figure 5-16 Device commissioning
Step 2 Connect to the inverter.
FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA) 5 Site Deployment and Commissioning
Issue 02 (2021-11-25) Copyright © Huawei Technologies Co., Ltd. 34
To Next Page
Loading...
Need help?
General