● When directly connecting your phone to a device, ensure that your phone is
within the WLAN coverage of the device.
● When connecting the device to the router over WLAN, ensure that the device is
within the WLAN coverage of the router and the signal is stable and good.
● The router supports WLAN (IEEE 802.11 b/g/n, 2.4 GHz) and the WLAN signal
reaches the inverter.
● The WPA, WPA2, or WPA/WPA2 encryption mode is recommended for routers.
The Enterprise mode is not supported (such as airport WLAN and other public
hotspots that require authentication). WEP and WPA TKIP are not
recommended because they have serious security vulnerabilities. If the access
fails in WEP mode, log in to the router and change the encryption mode of the
router to WPA2 or WPA/WPA2.
● The last six digits of the product WLAN name are the same as the last six digits of the
product SN.
● For the rst connection, log in with the initial password. You can obtain the initial
password from the label on the device.
● To ensure account security, protect the password by changing it periodically, and keep it
secure. Your password might be stolen or cracked if it is left unchanged for extended
periods. If a password is lost, devices cannot be accessed. In these cases, the Company
shall not be liable for any loss.
● If the login screen is not displayed after you scan the QR code, check whether your
phone is correctly connected to the device WLAN. If not, manually select and connect to
the WLAN.
● If the This WLAN network has no Internet access. Connect anyway? message is
displayed when you connect to the built-in WLAN, tap CONNECT. Otherwise, you
cannot log in to the system. The actual UI and messages may vary with mobile phones.
----End
SmartGuard-63A-(S0, AUS0)
User Manual C Connecting the EMMA on the App
Issue 03 (2023-12-27) Copyright © Huawei Digital Power Technologies Co., Ltd. 81
To Next Page
Loading...
Need help?
General