Huawei ST5110 - Syslogviewer

CCLINUX
USER Manual
Issue 1.2 (2018-09-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
32
Figure 4-8-1
According to the device interface, select the corresponding port, baud rate and other
information, click the "start" button. Click the Send button, it will send the data of "Send Area" to the
device. If the device has feedback, the result will be displayed in the "Receive Area".
2.4.9 SyslogViewer
1. Introduction:
Used to view the system log, including date, user, and event information; this feature is limited to
root user permissions.
2. Operating procedures:
Click "Start" -> "System Tools" -> "SyslogViewer", the running interface is shown in Figure 4-9-1: