Huawei ST5110 - Autostart Programs

CCLINUX
USER Manual
Issue 1.2 (2018-09-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
45
Figure 5-4-1
3. Reset factory parameters:
When you select the "Yes" button, the system will be reset parameters to the factory status:
including desktop properties, display settings, sound configuration, font, boot logo, Firefox browsing,
cache, configuration, HDP configuration, emptying the system trash, network configuration, firewall
disabled , account’s password and so on.
2.5.5 Autostart Programs
1. Introduction:
Use the "Autostart Programs" to list and set all auto-start programs.
2. Operating procedures:
Click "Start" -> "Preferences" -> "Autostart Programs", the running interface is shown in Figure 5-
5-1:
Figure 5-5-1