Huawei ST5110 - Usbview; Parallel Test Tools

CCLINUX
USER Manual
Issue 1.2 (2018-09-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
30
2.4.6 usbview
1. Introduction:
Check the USB device plugged into the PC, you can view the device's speed, port, version,
Vendor id, Product id information; this feature is limited to root user permissions.
2. Operating procedures:
Click "Start" -> "System Tools" -> "usbview", the running interface is shown in Figure 4-6-1:
Figure 4-6-1
2.4.7 Parallel Test Tools
1. Introduction:
Used to provide self check and manual detection of the parallel port; this feature is limited to the
root user permissions.
2. Operating procedures:
Click "Start" -> "System Tools" -> "Parallel Test Tools", the running interface is shown in Figure 4-
7-1: