CCLINUX
USER Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
If you want to setup a program starts automatically, you should check the check box which is
relate to this program. This Setting takes effect after terminal reboot.
2.5.6 Software List
1. Introduction:
Use the “Software List” to list all available software information for the system, including name,
version, architecture, description.
2. Operating procedures:
Click "Start" -> "Preferences" -> "Software List ", the running interface is shown in Figure 5-6-1:
Figure 5-6-1
Click the "Select filter" drop-down box to select the software type which you want to be
filtered. The software types including: "Only application", "Only system application " and "All". If
you select "All", the software list displays the information of applications and the system
applications.
2.5.7 System Cache Cleaner
1. Introduction:
Use the “System Cache Cleaner” to clean up system cache.
2. Operating procedures:
To Next Page
Loading...
