Huawei SUN2000-43KTL-IN-C1 - Support-Mounting the SUN2000; Determining the Installation Position

SUN2000-43KTL-IN-C1
User Manual
4 System Installation
Issue 07 (2018-05-06)
Copyright © Huawei Technologies Co., Ltd.
32
4.4 Support-mounting the SUN2000
4.4.1 Determining the Installation Position
Basic Requirements

The SUN2000 is protected to IP65 and can be installed indoors or outdoors.

Do not install the SUN2000 in a place where personnel are easy to come into contact
with its chassis and heat sinks, because these parts are extremely hot during operation.

Do not store the SUN2000 in areas with flammable or explosive materials.
Installation Environment Requirements

The SUN2000 must be installed in a well-ventilated environment to ensure good heat
dissipation.

When installed under direct sunlight, performance de-rate may be initiated due to
additional temperature rise.

The SUN2000 should be installed in a sheltered place or a place with an awning.
If the SUN2000 is installed in such a place, ensure that the clearances around the SUN2000
meet the requirements specified in Installation Space Requirements.
Figure 4-20 Awning
Carrier Requirements

The carrier where the SUN2000 is installed must be fireproof.

Do not install the SUN2000 on flammable building materials.

Ensure that the installation surface is solid enough to bear the weight load.