EasyManuals Logo

Huawei SUN2000-4KTL-M1 User Manual

Huawei SUN2000-4KTL-M1
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
NO TICE
Avoid scratching the core wire when stripping a cable.
The cavity formed after the conductor crimp strip of the OT terminal is crimped
must wrap the core wires completely. The core wires must contact the OT
terminal closely.
Wrap the wire crimping area with heat shrink tubing or PVC insulation tape.
The heat shrink tubing is used as an example.
When using a heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(1) Cable (2) Core (3) Heat shrink tubing
(4) OT terminal (5) Crimping tool (6) Heat gun
Step 2 Connect the PE cable.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 5 Electrical Connections
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 44

Table of Contents

Other manuals for Huawei SUN2000-4KTL-M1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SUN2000-4KTL-M1 and is the answer not in the manual?

Huawei SUN2000-4KTL-M1 Specifications

General IconGeneral
Max. efficiency98.4%
European efficiency97.8%
AC nominal power4000 W
Operating temperature range-25°C to +60°C
Max. DC Voltage600 V
Start Voltage200 V
Max. Short-Circuit Current per MPPT18 A
Number of MPPT Trackers2
CoolingNatural Convection
Protection DegreeIP65
Output Frequency50 Hz / 60 Hz
Nominal AC voltage220 V / 230 V / 240 V
Max. DC Power6000 W
Rated AC Voltage230 V

Related product manuals