Huawei SUN2000-4KTL-M1 User Manual

● Updated 5.2 Installation Preparation.
● Updated 10.1 SUN2000 Technical Specications.
Issue 11 (2023-04-07)
● Updated 5.8.6 Connecting the NS Protection Signal Cable.
● Updated A Grid Code.
Issue 10 (2023-02-07)
● Updated 2.1 Product Introduction.
● Updated 5.2 Installation Preparation.
● Updated 5.8.2 Connecting the RS485 Communications Cable (Smart Power
Sensor).
● Updated 5.8.6 Connecting the NS Protection Signal Cable.
● Updated 7.1.3 Creating a PV Plant and a User.
● Updated 7.1.4 (Optional) Setting the Physical Layout of the Smart PV
Optimizers.
● Updated 7.2 Parameters Settings.
Issue 09 (2022-10-10)
● Updated 5.2 Installation Preparation.
● Updated 5.4 Connecting the AC Output Power Cable.
Issue 08 (2022-06-30)
● Updated 5.2 Installation Preparation.
● Add 7.2.1.4 Capacity Control.
● Updated 10.1 SUN2000 Technical Specications.
● Updated A Grid Code.
● Add F AI Energy Management Assistant (EMMA).
Issue 07 (2022-03-04)
● Updated 5.8.2 Connecting the RS485 Communications Cable (Smart Power
Sensor).
● Updated C Resetting Password.
● Updated D Rapid Shutdown.
Issue 06 (2021-12-20)
● Updated 7.1.3 Creating a PV Plant and a User.
● Updated 7.2.1 Energy Control.
● Updated 10.1 SUN2000 Technical Specications.
Issue 05 (2021-11-24)
Updated 10.1 SUN2000 Technical Specications.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual About This Document
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. v

Huawei SUN2000-4KTL-M1 Specifications

General

Max. efficiency	98.4%
European efficiency	97.8%
AC nominal power	4000 W
Operating temperature range	-25°C to +60°C
Max. DC Voltage	600 V
Start Voltage	200 V
Max. Short-Circuit Current per MPPT	18 A
Number of MPPT Trackers	2
Cooling	Natural Convection
Protection Degree	IP65
Output Frequency	50 Hz / 60 Hz
Nominal AC voltage	220 V / 230 V / 240 V
Max. DC Power	6000 W
Rated AC Voltage	230 V