Figure 6-6 Function menu screen
----End
6.3 Powering O the System
Precautions
● If two SUN2000s share the same AC switch on the AC side, power o the two
SUN2000s.
● After the SUN2000 powers o, the remaining electricity and heat may still
cause electric shocks and body burns. Therefore, put on personal protective
equipment (PPE) and begin servicing the SUN2000
fteen minutes after power-
o.
Procedure
Step 1 Run a shutdown command on the SUN2000 app, SmartLogger, or NMS.
For details, see the
FusionSolar APP and SUN2000 APP User Manual
,
SmartLogger
User Manual
, or
iManager NetEco 1000S User Manual
.
SUN2000-(70KTL, 75KTL)-C1
User Manual 6 Commissioning
Issue 09 (2020-10-12) Copyright © Huawei Technologies Co., Ltd. 71