17
Click
Pull the DC input power cables back to
ensure that they are connected securely.
Extension cables for DC terminals
5. Connect the signal cable connector to the communications port.
Communications
port (COM)
4. (Optional) Install the Smart Dongle.
Smart Dongle port (GPRS/4G/WLAN)
•
If a Smart Dongle is configured, it is recommended that you install it before connecting the
signal cable.
•
This section describes how to install a WLAN-FE Smart Dongle.
•
The 4G Smart Dongle and WLAN Smart Dongle can be installed similarly.
To Next Page
Loading...
