19
2. Log in to the app and tap Setup Wizard and scan the SUN2000 QR code to connect to the
SUN2000.
3. Log in to the Device commissioning screen as user installer. At the first login, the Quick
settings screen is displayed by default. Set the grid code, time zone, time, and
communication address.
The initial password is
00000a.
For details about how to cascade SUN2000s and set communication
parameters, see the
FusionSolar App Quick Guide
. You can scan the QR code to
download the document.
When connecting
the Smart Dongle,
scan the QR code
of the SUN2000
connected to the
Smart Dongle.
To Next Page
Loading...
