Huawei TE40 - Multipoint Convergence

Control a Conference
Multipoint Convergence (1/2)
About Multipoint
Convergence

Multipoint convergence
is unavailable for the
TX50 after it has the
H.265 4K x 2K license
imported.

Multipoint convergence
works properly only
when the SMC2.0 and
MCU versions are
V500R002C00 or later.

To access the Setting
screen, you must enter
the administrator
password (default:
12345678). Obtain the
password from the
administrator.
Tap here.
2
Tap Setting.
3
4
Tap Configuration
Wizard.
Choose Advanced
Settings. Then enter the
administrator password.
5
Tap the value of
Multipoint call mode.
6
Select Multipoint
converge.
Back to Contents