Huawei UPS2000-A-1KTTL

● IP address display
Display Remarks
UPS IP address: The displayed
parameter cannot be set. Press ▲ or
▼ to switch between dierent screens.
On the ESC screen, press the OFF/
ENTER button to exit. (The default
value is 192.168.0.10.)
● Subnet mask display
Display Remarks
Subnet mask: The displayed parameter
cannot be set. Press ▲ or ▼ to switch
between dierent screens. On the ESC
screen, press the OFF/ENTER button to
exit. (The default value is
255.255.255.0.)
● Gateway display
Display
Remarks
Gateway: The displayed parameter
cannot be set. Press ▲ or ▼ to switch
between dierent screens. On the ESC
screen, press the OFF/ENTER button to
exit. (The default value is 192.168.0.1.)
● Setting the no battery alarm function
UPS2000-A-(1 kVA-3 kVA)
User Manual 5 Setting Control Panel
Issue 17 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 57