Huawei UPS5000 - Page 27

Figure 3-20 Removing the sealing plates
Step 11 Install anchor bae plates for the top air-ow cabinets.
Figure 3-21 Installing anchor
bae plates
Step 12 (For a dual-cabinet UPS, optional) If the UPS is installed against a wall, reinstall
the rear covers for the top
air-ow cabinets, remove the left and right side panels
from the top air-ow cabinets, and put the side panels away.
Step 13 (For a dual-cabinet UPS, optional) If the UPS is installed against a wall, move the
UPS cabinets combined with the top
air-ow cabinets to the installation position.
If the antiseismic kit is
congured for the UPS, secure the antiseismic kit to the
ground from the side of the top air-ow cabinet.
Step 14 Install the bottom plates for the top air-ow cabinets.
UPS5000 Top Air-ow Cabinet
User Manual 3 Product Installation
Issue 02 (2022-01-19) Copyright © Huawei Technologies Co., Ltd. 22