Huawei UPS5000 - Product Installation; Unpacking and Checking; Installation Tools

3 Product Installation
3.1 Unpacking and Checking
After the top air-ow cabinet is delivered onsite, unpack the case and check as
follows:
● Visually inspect the appearance of the top air-ow cabinet for shipping
damage. If any damage is found, notify the carrier immediately.
● Check that the
ttings comply with the packing list. If some ttings are
missing or do not comply with the packing list, record the information and
contact your local Huawei
oce immediately.
3.2 Installation Tools
Table 3-1 lists the installation tools.
Table 3-1 Tools
Tool
Picture Used To
Step ladder Support work at heights.
Multimeter Check electrical
connections and
measure electrical
parameters.
Insulated Phillips
screwdriver
Connect cables and
tighten screws.
UPS5000 Top Air-ow Cabinet
User Manual 3 Product Installation
Issue 02 (2022-01-19) Copyright © Huawei Technologies Co., Ltd. 7