Hubble Dream+ - Setting up your Smart Camera; Connecting Camera Power and Mounting

11
Setting up your Smart Camera
English
4. Setting up your Smart Camera
4.1 Connecting the Power Supply of the Camera Unit
• Insert the DC plug of the power
adaptor into the DC socket on the
back of the Camera Unit.
• Connect the other end of the power
adaptor to the electrical outlet.
• The Camera Unit turns on and the
power indicator lights in Green colour.
Note
Only use the supplied power adaptor
(DC5V/1000mA).
4.2 Fixing magnetic mount on the wall
Pair button
• Mark the position of the screw holes on the wall.
• Install wall anchors (Not provided) suitable for the wall type and
mounting screws if needed.
• Fasten the mounting screws (Not provided) on the wall.
• Position the cable behind the base as per image before hooking the
base on the wall.