Huck HK-150 - Perating I Nstructions; Ivet Intail Emoval

7






Figure 2










Figure 3
oPeratIng InstructIons (continued)
CAUTION: It is necessary to
remove Pintail before attempting
to install another Rivet.
Rivet Pintail Removal
Once Rivet is installed, Pintail must be
removed.
1. Point tool downward.
2. Squeeze the Handle while pressing
the Releasing Button.
rIvet PIntaIl reMoval
HK-150 Series Tools (HK1058) Arconic Fastening Systems and Rings