FAQ’s – Replacing the new fin
How do I replace the new fin?
Our fins have always been designed to break away under impact. Our new fin/finbox system
make the fin immediately replaceable, as they do not require silicone to keep them in place.
Begin by clearing the fin slot of any old silicone (and the tab of the broken fin), and removing
the set screw. Ensure that there was no other damage that might require attention before you
replace the fin.
When you are ready to insert the new fin begin by inserting the tabbed end (bow side) first,
and slide the fin as far to the bow as it will go.
To Next Page
Loading...