6-2. Starting the device
1.
Turn on the power switch to start the device.
The OELD display will show as below and the device will guide by voices.
2.
When “Enter Key” appears on the screen, enter the key to activate the device.
If the key is not entered properly, turn off the device and restart.
[Note]
This device requires an electronic key to prevent the unauthorized person from using the laser
for safety.
6-3. Selecting the procedures
1.
When the start-up screen appears on the screen as below, select a category for the appropriate
procedure by pressing the up and down button.
“E P I S O” means Endodontics, Periodontics, Implant, Surgery, Others abbreviation.
2.
Press the enter button to select a procedure and the below screen will display.
22
To Next Page
Loading...
Need help?
General