6-4. Function settings
1.
Press up or down button to select the function in the main screen.
2.
Adjust the laser beep volume, voice volume, or aiming beam, and each function has each different
level to adjust.
Each setting has 5 levels. (Level 1 is the lowest and level 5 is the highest. Except voice)
-Aiming Beam: To modify the aiming beam brightness.(Level 1 to 5)
-Voice: To modify the voice sound (Level 0 to 5) (You may mute the voice.)
-Beep Sound: To modify the beep sound (*you cannot turn o
ff
beep, Level 1 to 5)
3.
Press the select button for around 2 seconds to move the previous menu.
24
To Next Page
Loading...
Need help?
General