10
2.1 Description of control panel buttons
2.1.1 Power button
The
Power
button is the last button on the right. It
is used to power on and off the SmartView Synergy.
When the Power is on, the lights over the table will
illuminate and the
Power
button will glow green.
2.1.2 Enhanced contrast mode button
The
Enhanced contrast mode
button is the first button
on the left. When in Color mode, use the
Enhanced
contrast
button to switch to Enhanced contrast mode.
Enhanced contrast colors can make text easier to
read. The Synergy allows you to view the text with
different color combinations.
Enhanced contrast mode full color set
When in Enhanced contrast mode, press the
Enhanced
contrast
button to cycle through the 16 foreground
and background color combinations. The selected
color combination will be saved as your preferred
selection when the unit is powered off.
Enhanced contrast mode restricted color set
You can also limit the range of color combinations.
To toggle between full color set and restricted color
set, press and hold the
Enhanced contrast
button
To Next Page
Loading...
