Humanware SmartView Synergy - 2.1.3 Color Mode Button Function; 2.1.4 Page Locator Button Usage

11
for five seconds, a confirmation beep will be heard
if Beep option is enabled in the main menu.
From a full set of 16 color combinations, pressing
and holding the
Enhanced contrast button for five
seconds will restrict color combinations: current
foreground and background colors, inverted foreground
and background colors, black on white and white on
black. Note that activating restricted colors when
current selection is black on white or white on black
will limit the available choices to these 2 combinations.
Note: The
Enhanced contrast button is also used to
Exit the menu and the Line and Blinds feature.
2.1.3 Color mode button
When in Enhanced contrast mode, use the
Color
button to switch to Color mode. In this mode,
images will be displayed in full color.
Note: When in viewing mode, pressing and holding
the
Color button for 2 seconds will activate the
Main menu. When in this menu, the Color button
will be used to make selections.
2.1.4 Page Locator button
(Advanced control panel only)
Page locator feature is designed to pinpoint the
center of what is captured by the camera. Press the
Page Locator button to turn on or off the Page
locator LED.