Humanware SmartView Synergy User Manual

13
The position of the line and the width of the blinds
can be adjusted. Use the
Brightness knob to adjust
the position of the line. To modify the width of the
blinds, press and hold the
Line and Blinds button
for two seconds. After a short beep, you will be able
to use the
Brightness knob to adjust the width of
the blinds.
2.1.7 Brightness knob
While in Enhanced Contrast or Color mode, turn the
Brightness knob clockwise or counterclockwise to
increase or decrease the Brightness level. Separate
brightness levels will be saved for Enhanced
Contrast or Color modes.
Notes: When in the Menu, the
Brightness knob is
used to cycle through menu options. The
Bright@
ness
knob is also used to adjust Brightness, Color
or Contrast through the menu.
When Using the Line and Blinds option (Advanced
control panel only), the Brightness knob is used to
move and adjust the line and blinds.
When used to navigate menu options or to adjust
Line and Blinds, the
Brightness button will not mo
dify current Brightness levels.

Humanware SmartView Synergy Specifications

General

Brand	Humanware
Model	SmartView Synergy
Category	Magnifiers
Language	English