Humanware SmartView Synergy - 2.1.5 Zoom Knob Adjustment; 2.1.6 Line and Blinds Feature

The Page Locator button is also used to change the
video configuration. Press and hold the
Page Locator
button for 2 seconds to perform an input/output
video switch. For information on how to set the unit
for input or output, please consult the Display Sub
menu section, Video Switch item.
2.1.5 Zoom knob
The
Zoom knob is used to change the magnification
factor of the image seen on the screen. Turn the
knob clockwise to increase magnification or turn
counterclockwise to decrease magnification. There
are 24 different magnification levels.
2.1.6 Line and Blinds
(Advanced control panel only)
Line and Blinds is a feature that can help you
control what appears on screen. The line can help
you separate what appears on screen while the
blinds can be useful to block unwanted sections of
the text.
Short presses of the
Line and Blinds button will
cycle through the following options:
• One horizontal line over the display
• One vertical line over the display
• Horizontal blinds over the display
• Vertical blinds over the display
• No line or blinds
12